Re: 5.50 GEN-C Custom Firmware
LOL I tryed to go from 5.00 m33-6 to GEN-C and then used my Pandora for 4.01 m33-2 beacause GEN-C was to buggy. Now it says system software is 4.01 to start you need 5.03 do you want to update now? I pressed no and it said I need to upgrade before my next use lol I suck. (not literly) Im puttng in the 5.00 m33-6 now. Ok its done. W0000T!! It works!! Yay!! lol =P
Re: 5.50 GEN-C Custom Firmware
hmm well has anyone tested gen d yet
Re: 5.50 GEN-C Custom Firmware
Quote:
Originally Posted by
X-dude
hmm well has anyone tested gen d yet
I don't know considering Gen D-2 is coming out now..
Re: 5.50 GEN-C Custom Firmware
oh but would u have to get gen d to update to gen d-2 or can u update from gen b-2 to gen d-2
Re: 5.50 GEN-C Custom Firmware
Quote:
Originally Posted by
X-dude
oh but would u have to get gen d to update to gen d-2 or can u update from gen b-2 to gen d-2
GEN-D is required to update to GEN-D2.
Re: 5.50 GEN-D2 Custom Firmware
Do you need GEN-C to go to D? Or can you go straight from GEN-B2 to GEN-D?
Re: 5.50 GEN-D2 Custom Firmware
Re: 5.50 GEN-D2 Custom Firmware
Yes U can update from B2 to D
Re: 5.50 GEN-D2 Custom Firmware
Re: 5.50 GEN-D2 Custom Firmware
Put "http://www.consolediscussions.com/fo...095/page7.html" in your browser and check out the first part of my problem.
Ok... after ^that^ I put in the GEN-C installer and after it got to 100% it shutdown by its self, the last time I put GEN-C in it gave me the option to X = Reboot O = Shtdown. Altho I went to Settings --> System Settings --> System Information and it says "5.50 GEN-C (Full)"
Ok I dont think the above matters because I put in GEN-D. I went to Settings --> System Settings --> System Information and it says "5.50 GEN-D (Full)" So wahtever.
Now im putting GEN-D2 and the screen is blank although you can see the backlight and can tell its not off. The MS Light flashes for ½ a second then turns off for 2.01 seconds (yes I timed both). Ok its now been doing this for a boring 15 minutes. Im afriad to shut it off. What do I do?
I pulled out the battery when the MS light was flashing because i'd prefer to screw up replaceable files then my PSPs Flash... I turned it back on, so far so good. I went to Settings --> System Settings --> System Information and it says "5.50 GEN-D (Full)". Im going to try it again... Still the same shit. I went to the GEN-D recovery menu (the green looks cool! so much for livelier then the dark red from the m33 FWs), and switched the Homebrew folder to 1.5 and the UMD mode to m33 driver. Im running the D2 installer.... again! WHAT THE FUCK! STILL THE SAME FUCKING SHIT! Why wont this stupid ass motherfucking shit work?
Suggestions anyone?