when I put a cso in my iso folder and try and run it it just wont work. Can anyone shed some light
Printable View
when I put a cso in my iso folder and try and run it it just wont work. Can anyone shed some light
Where did you put your ISO folder?
and did you spell it with all CAPS? (I'm pretty sure it is case SENSITIVE)
Make sure you put the ISO folder in your MS ROOT(the part you see when you open you MS to view files. Also make sure you have any game UMD in your PSP drive if you don't have a UMD in your drive it will fail to start, any UMD game will do.
My Folder is in My MS Root. Ill try the umd thing THnx
Try these solutions:
Go into the Recovery Menu or press the Select button to get to the VSH Menu.
When you're in the Recovery Menu, go to 'Configuration'. Then scroll down to 'UMD Mode:' and press the X button over until you get to 'M33 driver -NO UMD-'
When you're in the VSH Menu, scroll down to 'UMD ISO Mode' and press the X button over it until you get to 'M33 driver'
EDIT:
Do you have Custom Firmware? You need Custom Firmware to use ISOs/CSOs
Turn you're vsh menu on and then go to the one thing that turns into n3960 (sorry I bricked my psp a while ago so I can't get it very detailed sorry:sad:) if you don't do this they won't work and you'll get a error