How to send CE to a non-hacker*longer way*
The first thing you will need to do is download a couple of things...which will be listed below..
g54macid
Hex Workshop
Then you need the person's Email you are sending the CE to..You will need this later..
After you have downloaded both of those you need to extract them..
Then put your psp into usb mode.Then goto the Game folder..(-->Computer-->Memory Stick(drive:)-->PSP-->GAME)
and put the g54macid in there......Now if you aren't running and 0E-A or on 1.50 then what you will need to do is get the kernel add-on
for I can provide only two add-ons which will be at the bottom...
If you had to install the add-ons you need to reset you psp and on start up hold ''R'' then goto configuration and put the game folder homebrew
to 1.50..should look like this (currently : 1.50 kernel)..Then exit and goto the XMB...Go under Memory Stickâ„¢ and click gracz54 MAC Address Change.
A menu should show up with 3 choices:
Press x to dump your PSP's MAC address to ms0:/macid.bin
Press o and L to flash your new macid.bin
Press HOME to exit...
Pick the first one the Press x..it will say DUMPING MAC address will take a few seconds...
then it will go back to the XMB..Now put your PSPâ„¢ into USB Connection(USB mode) then when you look into the folder you will se macid.bin or just macid
right click on it and choose ''Open with...'' pick browse and find hex workwhop..then you will see a shit load of numbers
just change the first twelve only or you could fuck your shit up...I found out the hard way...Ok change the first numbers or letters to the person's MAC address
like mine is 002456768997 lol dont worry its a fake...So if you want it there you go.But this is were you put the person your sending the CE MAC address goes.
Change those numbers to say 129076897675...Then save it...If you want to make a
back up..Ok then exit USB connection (USB Mode) and goto Memory Stickâ„¢ and pick gracz54 MAC Address Change..You will see this again
Press x to dump your PSP's MAC address to ms0:/macid.bin
Press o and L to flash your new macid.bin
Press HOME to exit...
This time pick the 2nd one Press o and L. It will flash it..To make sure it worked goto System Settings and goto the bottom to System Information..It should say the Mac Address
that you have just put it...Now exit that and put Fire Team Bravo 2 under UMDâ„¢...Make sure you have your NitePR enabled..Then make the person's name that your giving CE to..and save
then Turn Inf CE on then goto Profile on Ftb2 and goto General Options and click Save let it save..Now click HOME and click ''Yes''then plug in your PSP into USB Connection(USB Mode)
again.....And this time open up your internet on your computer..now open your email and start to send them an Email..You should see something that says Attach File..Click that and
find your PSP...Which should be on the side you'll see Computer,Desktop,Network,etc...pick Computer..Then pick your PSP Drive...Then goto PSP-->SAVEDATA-->UCUS-98645..Open it
and you will see some files all you need is these:ICON1.PMF,PARAM.SFO,SND0.AT3,SOCOMFT2.BIN..T hose are the file's that you attach to your Email...After that tell them to
''PUT THESE IN YOUR SAVEDATA-->UCUS98645 FOLDER...And you are done if they dont know what to do say ''screw you'' and move on..
3.90 kernel add-on
5.00 kernel add-on
lol forgot this put this on your root of your Memory Stickâ„¢
1.50 update
Yes I know you can do this and make it easier if u just use your nitepred.exe...but I was bored and felt like typing alot....
Oh yea if this has helped you plz dont forget to Rep+
Reply With Quote
Bookmarks