User Tag List

Results 1 to 10 of 13

Thread: Fix A Semi Brick Without A Pandora.

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Fix A Semi Brick Without A Pandora.

    User Info Menu

    Fix A Semi Brick Without A Pandora.

    Credit To Nina.Gardener




    SEMI-BRICKED PSP (The power is on but the screen stays black)
    CAN access the RECOVERY MODE (turn your PSP on holding the "R" button)


    FULLY-BRICKED PSP: Your PSP turns on with a BLACK screen + can't access RECOVERY mode...
    SEMI-BRICKED PSP: Your PSP turns on with a BLACK screen + you can access RECOVERY mode...

    You can downgrade custom firmware 3.80m33 + 3.90m33 + 4.01m33 WITHOUT PANDORA by downloading the 3.71m33 recovery file below
    (I tested it twice and it worked both times!)

    ________________________________________________

    RECOVERY FLASHER



    VERY special thanks to carbonfor finding an unexpected error in the 4.01m33 download (fixed now)
    VERY special thanks to dnice9032for finding an unexpected error in the 3.71m33 download (fixed now)


    Recover your PSP to 4.01m33 DOWNLOAD THIS



    (I STRONGLY recommend 3.71m33 because with the PSP it's WAY easier to UPGRADE than downgrade)

    After downloading and EXTRACTING - you'll have a folder called RECOVERY.

    This folder goes into PSP\GAME

    Turn your PSP ON holding the "R" button (to access RECOVERY MENU) and select TOGGLE USB.

    Plug your PSP to the computer (USB etc) and transfer the above download "recovery" folder (for 3.71m33 or 4.01m33) to PSP\GAME (over ride if it asks you to),

    Go to CONFIGURATION and set your "autorun program at..." to ENABLED




    to BACK and then select "RUN PROGRAM AT..."


    You'll see something like this


    (I selected I agree, now take me to the program)

    Select "flash new 3.71m33" or "4.01m33" whichever you downloaded above


    There is one more menu. I selected "reset (format) settings as well". This will reset the TIME AND DATE + PSP name etc. If you don't want to start up the TIME and DATE again...select "do not reset..." and press X



    Give it a moment and it'll start doin' it's thing


    When done... "press any button"



    NOTE: When you press "X" to shut down your SCREEN may appear turned off while your power light may start blinking or stay solid. You can remove the battery and then put it back in and turn your PSP back on and everything should be fine.

    PLEASE NOTE: If you are downgrading your PSP custom firmware, you may get get this blue error screen


    Just press CIRCLE like the screen suggests...and your PSP should re-start again and then boot up asking for the TIME AND DATE config. stuff.

    Last edited by SyKotik Cannon; 07-21-2009 at 03:36 PM.


    [Today 12:00 AM] -.Z3U5.-: Quit tryig to get me to look at your big fat ass chode spinning around in circles.




Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •