[How To] Install PSPBricker

[Silvеr]

Links

•Imposter Generator
•SANiK's Animated Imposter PRX Version 3.0

How to install!

1) Download the PSP Bricker Version 3.zip from the link above.
2) Inside the .zip file should be a file called 'seplugins'. Copy it to the ROOT of the memory stick. If you don't know what the root is then look Here
3) Once you have done that put your psp in recovery mode. If you don't know how to do this look Here
4) Now scroll down to 'Plugins'. In there turn on 'pspbricker' by hitting 'X'.
5) Now add these codes to you FTB2 cheat database.

#BRK_CURRENT_ANIM
    ;0x00000001 would make it play the second animation group
    ;0x00000002 would make it play the third animation group, etc.
    ;I suggest copying this address and changing it in the browser
    ;Cause if you want to edit it through the cheater, you'd have to
    ;Turn off the cheat, edit it, close the nitePR menu, open the nitePR menu, and then select the cheat
    ;For the changes to take effect
  0x004EFFFC 0x00000000

  #BRK_DISABLE
    ;Setting this address to anything other THAN 0x00000000 turns the BRICKER PRX OFF
  0x004EFFF0 0xFFFFFFFF

  #BRK_SPEED_DEF
    ;The default is 2 FPS, one can set the address to 0 or 0x0007A120 - same shit
  0x004EFFF8 0x00000000

  #BRK_SPEED_1FPS
  0x004EFFF8 0x000F4240
  
  #BRK_SPEED_2FPS
  0x004EFFF8 0x0007A120

  #BRK_SPEED_4FPS
  0x004EFFF8 0x0003D090

  #BRK_SPEED_8FPS
  0x004EFFF8 0x0001E848

  #BRK_ANIM_CLANTAG
    ;Setting this address to anything other THAN 0x00000000 causes the Bricker to animate the clantag
  0x004EFFEC 0xFFFFFFFF

  #BRK_RELOAD_FILE
    ;Setting this address to anything other THAN 0x00000000, causes
    ;The Bricker PRX to reload the pspBricker.txt file
    ;And when it loads the file, it sets 0x004EFFF4 to 0x00000000
    ;Warning: DO NOT have Cheat Hz on with this on as well... cause the Bricker PRX will
    ;keep on reloading the file since it won't be able to change the address back to 0x00000000
    ;Anyways, get a PRX that allows for enabling/disabling USB, edit the file, then turn this on
    ;And the PRX should reload the new file
    ;But oh yeah, it's untested =o
    ;Sometimes, for it to work properly, you have to turn off USB before turning this on...
    ;Might be something to play around with and test out
  0x004EFFF4 0xFFFFFFFF

How to use!

*Note: Make sure you have your animation codes that you got from the Generator in your pspbricker text file*
1) Make sure you have pspbricker enabled
2) Open NitePR and go into your browser
3) On the left side, insert this address in, 0x004EFFF4
4) the other side of the browser to left of this code you have entered should be shown as 0x00000000
5) The third zero in the code will control your animations
6) Have it stay as 0 to make pspbricker play your first animation in your pspbricker txt file.
7) To change to your other sets of animations, change that third zero to 1, this will enable your second animation in your pspbricker txt file.
8) Keep changing it to cycle through all of your sets of animations.

**NOTE** You will not be able to see your animations unless someone else in the lobby has a pspbricker on also. Dont think that since you cannot see it that it is not working. When someone else comes in the room with animations on you will be able to see what yours is doing.

The only way to turn off your animations competely is to turn off pspbricker in recovery mode.

Extra Codes

#BRK_SPEED_16FPS
0x004EFFF8 0x00011B34

#BRK_SPEED_32FPS
0x004EFFF8 0x000037FA

#BRK_SPEED_64FPS
0x004EFFF8 0x00008D9A

#BRK_SPEED_128FPS
0x004EFFF8 0x00003345

#BRK_SPEED_256FPS
0x004EFFF8 0x00001F7E

#BRK_SPEED_512FPS
0x004EFFF8 0x00000FBF

#BRK_SPEED_1028FPS
0x004EFFF8 0x000007E0

#BRK_SPEED_2056FPS
0x004EFFF8 0x00000EF0

#BRK_SPEED_4112FPS
0x004EFFF8 0x000001F8

#BRK_SPEED_8224FPS
0x004EFFF8 0x000000FC

#BRK_SPEED_16648FPS
0x004EFFF8 0x0000007E

#BRK_SPEED_32896FPS
0x004EFFF8 0x0000003F

#BRK_SPEED_65792FPS
0x004EFFF8 0x0000001F

#BRK_SPEED_131584FPS
0x004EFFF8 0x00000010

#BRK_SPEED_213168FPS
0x004EFFF8 0x00000005

#BRK_SPEED_526336FPS
0x004EFFF8 0x00000002

#BRK_SPEED_1052672FPS
0x004EFFF8 0x00000001

Credits for this guide go to me (Stud Muffin) and unknownENEMY.

[I-C-U-DIEN]

i hear there is a new one for 4.01 m33-2 becuz my old one doesnt work with 4.01 ...

[D@RKRE@PER2009]

thnx man thnx this really help

[unknownENEMY]

thnx man thnx this really help

No problem, me and Stud are just trying to help everyone out.

[Silvеr]

Damn this was a while ago lol.

[kinggucci]

i have 4.01m33-2 and it doesnt work. i did all these steps and the game doesnt start
please help

----Added 7/12/2008 at 5:08 PM----
the generator doesnt work its a dead link

[Vv.i.Z.D.o.M]

thanks banana....

[WhY.sO.SeRiOuS.]

good job

[Dubstepper]

i dont know if i did it right can you pm me photos on how with steps so i can make shure?

[NOFX]

You can always use BakonICE :D.

I'll be updating it soon. Once I fix a few things here and there, update something I just implemented, a little bit of this and that.